Lithofin SPLASH STOP
This Universal water protection product repeals water, protecting against penetration of moisture, paving slabs will then have a reduced tendency to become dirty. The water protection is not suitable for driveways or places where oil spills are likely. For areas such as these we would recommend Lithofin STAINSTOP >W<.
Availability: In stock
£52.80 (£44.00 excl. VAT)
This product is ready-to-use, lasts many years, can be used for indoor or outdoor applications and has no gloss. Please be aware that this product does contain solvents. You should cover approx. 7 to 15m2 per litre. This material will not stop oil stains. Price is for 1 litre with free UK shipping. Lithofin SPLASH-STOP penetrates into porous surfaces and forms a thin coat inside the capillaries. This coat prevents the penetration of water and dirt, forcing it to remain on the surface. Surfaces stay clean longer and become easier to maintain. The appearance of the surface is not, or only slightly, altered. Lithofin SPLASH-STOP is UV-resistant and does not yellow. Properties: Lithofin SPLASH-STOP penetrates into porous surfaces and forms a thin coat inside the capillaries. This coat prevents the penetration of water and dirt, forcing it to remain on the surface. Surfaces stay clean longer and become easier to maintain. The water permeability is hardly affected. The appearance of the surface is not, or only slightly, altered. Lithofin SPLASH-STOP is UV-resistant and does not yellow. Durability: Outdoors, depending on weather conditions, approx. five to ten years. Indoors, with correct maintenance, nearly unlimited. Field of Use: For rendering facades and other surfaces made from natural stone (e.g. sand stone, granite, limestone) and quarry tiles, engineered stone and concrete water and dirt resistant. Suitable for indoor and outdoor use. Directions for Use: The surface to be treated must be absorbent, clean and completely dry. Generously apply a consistent amount of Lithofin SPLASH-STOP with a brush or roller. In case of very absorbent materials, repeat the application after approx. 30 to 40 minutes. Avoid puddles, drips and foam. Do not allow the product to dry on the surface. Immidiately distribute and remove surface residues with a cloth. Please Note: Always try the product in an inconspicuous area prior to use. Non absorbent and wet surfaces can not be treated. Glass, plastics and other solvent sensitive surfaces must be protected against splashes. The surface temperature must be between 10°C and 25 °C. Do not use in direct sunlight. Drying Time: approx. 40 minutes Coverage: depending on the surface. Sandstone: approx. 1 to 4m² per litre Quarry tiles: approx. 5 to 8m² per litre Rough granite: approx. 10 to 15m² per litre Storage: Keep cool, closed and dry. Shelf life of up to three years. Open containers should be used quickly. Environmental Protection: Contains solvents. Free of chlorinated hydrocarbons. Disposal: Liquid product is classified as special waste. Containers are made of environmentally friendly tin plate. Clean containers can be recycled through collection systems. Contents: Aliphatic hydrocarbons; polysiloxanes; auxiliary agents. Risk and Safety Phrases: Flammable. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Keep out of the reach of children. Do not breathe vapour. Avoid contact with skin. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. First Aid Procedures: Remove contaminated soaked clothing immediately. In case of inhalation, ensure of fresh air. In the event of symptoms refer for medical treatment. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomitting. If swallowed by mistake drink plenty of water and seek medical treatment. Emergency Procedures: In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). In case of fire formation of dangerous gases possible. Suitable extinguishing material: foam, dry powder, carbon dioxide, sand. Additional Information is listed on the Material Safety Data Sheet ADR2003: flammable liquid, n.o.s. UN 1993, Class 3 Packaging Group III Packaging: 1 litre bottle with childproof cap This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Where no previous experience is available, or in cases of doubt, test the product in an inconspicuous area.